Please Stand By

Wishing you all the best!

2011-12-22T14:42:00.001-05:00

Hair

2011-10-26T17:20:00.001-04:00

Doodle of the day

Kid Designs

2011-10-24T17:21:00.001-04:00

Doodling around in photoshop :]

Montreal Stop Motion Film Festival!

2011-10-19T13:11:00.006-04:00

I'm happy to say that The Helmet will be playing this weekend at the Montreal Stop Motion Film Festival under the academic films category!
Sadly I won't be able to make it, but if you get the chance keep an eye open for my little film :]

Here's a reel from last years selection:

Exciting!

Sorry about the lack of posts, the transition from school to full blown adult has been more time consuming then I ever could have imagined! But I do plan to start posting regularly again so fear not!

Pretty Girls

2011-06-24T10:05:00.000-04:00

I know so many of them.

Demo Reel!

2011-05-21T01:09:00.003-04:00

Hope you enjoy!

Teaser Trailer for The Helmet

2011-05-19T02:47:00.000-04:00

I'm not ready to post my film online just yet as I'd like to submit to festivals, but I have put together a little trailer to give people an idea of the work I've done. Wonderful music done by Bruno Degazio :]

Puppet Making Process!

2011-05-02T03:23:00.002-04:00

One of the biggest challenges and most time consuming steps in the making of my film was in making my puppet. When I began I had very limited knowledge in how to go about making a professional puppet but it was something I was determined to do, and now at the end I'm really glad that I did.

The first step was in making his armature. The armature is basically the bones of your puppet, and I found as I was going about mine that I had to make changes to my overall character design based on the kind of animation I was hoping for.

I was also introduced to the wonderful world of soldering! The chest and pelvis plates are made out of brass stock which I cut to size. I then cut square brass stock and soldered that on top, drilled holes and then soldered bolts on top of them. This was so I could have replacement parts, if an arm or a leg broke I could just loosen the bolts and pull them out.

The arms and legs were made out of twisted wire, epoxy and a smaller piece of square brass stock that fits into the chest and pelvis plates. This isn't as professional as aluminum blocks would have been, but seeing as that wasn't an option for me, this was the best solution. They lasted me the entire year, with only a little breakage at the end.

The next step was to tape up the armature and sculpt my puppet over it in chavant. This was time consuming as this sculpt represents the final look of my puppet so I had to make sure I included all the details I wanted. As soon as he was done it was time to chop him into pieces to prepare for molding!

I cut him into pieces because this would allow his parts to be removable, which was a definite must with my film. This was a step I wish I had spent more time on/understood better at the time - I would have been able to better hide his joints if I had. Oh well, next time!

After dismembering him I walled up his parts with clean clay - but only to the halfway point. This is because I would be pouring a type of cement/stone mixture over top of it to begin making a mould. To make the other half I removed the clay, used Vaseline to make sure the stone wouldn't stick together, and poured more over the other side of the parts.

You can also see the plastic heads I cast, I poured silicone over the sculpt of the head, then poured plastic into the mould it made. I sloshed the plastic around so it would only coat the outside and leave the head hollow - making it nice and light!

Once the moulds were done I cast silicone arms, and with the help of Daniel Baker (one of the teachers of Sheridans Special Effects course) baked the foam latex that made up his legs and body. If I were to do this process again I would have decided to use foam latex for all of the parts, as the silicone was hard to paint and didn't hold poses as nicely as I would have liked.

After everything was cast it was time to seam everything and prep for paint!

Painting the foam latex was pretty easy, and once it was done a bit of powder to take off the shine was all that was needed.

The silicone arms however were a very different story. While painting them wasn't hard, matting them was a nightmare. There is a very specific process you have to go through to matte silicone, and if you don't follow this procedure exactly...when you go to wash off the excess powder used to make the paint matte - you also strip off all your paint.
Where the latex took me a few hours to paint, the silicon took a week. It was a very frustrating time for me.

But in the end it all worked out, and overall this little guy served me very well. I look forward to my next puppet project, though it probably won't be as labour intensive as this one was!

That's a wrap!

2011-04-25T13:43:00.000-04:00

The film is done! Some tweaks left to do, but the bulk is done and the puppet has survived! Posting shall resume!

It must be week 11

2011-03-27T23:53:00.003-04:00

This post is brought to you by the letter J and the number Appu

Plant your feet...

2011-03-23T00:15:00.001-04:00

...there's a storm a'coming!

Working through

2011-03-15T02:47:00.000-04:00

It's a rough go sometimes, but I have to say I really love what I'm doing.

I've been meaning to update with puppet progress pictures, I just haven't had the time, all must go towards the film!

Just a peek

2011-02-26T00:41:00.000-05:00

Here are two shots I took in an effort to figure out what kind of lighting and colour direction I'm taking with my film. I'm pretty happy with how things are shaping up.

Next post will be about my puppet making process :]

Back to Blogging

2011-02-16T17:25:00.001-05:00

Sorry for the inactivity, I'm busy working away on the production of my film and forgot to keep this place updated.
Things are going well, so I hope to have some puppet pictures up shortly as well as a few scene shots. Stay tuned!

Girly doodles

2010-12-26T23:20:00.004-05:00

Felt like sketching while watching movies with my mom and grandma. I like some more than others :]

I also keep playing with my blog layout, I'm never happy with any of the changes I make so it's never ending :B

Happy Holidays!

2010-12-24T03:20:00.000-05:00

Wishing the best to you and yours! Onwards to the new and better year!

Things

2010-11-07T02:01:00.000-05:00

Trell

2010-11-06T00:48:00.001-04:00

Playing with colours. His helmet was supposed to glow in the film but sadly, that has been cut. I might still do it for fun though.

Colouring book

2010-11-05T23:50:00.002-04:00

Coloured some sketches from my sketch book. I'd like to make puppets out of these girls one day.
I did these at school and the colours looked so nice. My monitor really dulls things out, so tempting to up the saturation...

More old film concepts/boards, all scrapped :}

2010-11-02T23:21:00.001-04:00

This is Halloween!

2010-11-01T00:55:00.000-04:00

Playful

2010-10-26T01:18:00.000-04:00

Thesis film early character designs

2010-10-22T01:11:00.000-04:00

I originally had two characters in my film, they've since been combined into one in a hopes to make things simpler and clearer. These are older designs, and I am very slowly coming to the final design - I'll post more later.

Any feed back on concepts/ideas (or story leica for anyone that was at the screening) is very much welcome and appreciated!

Thesis film early concept work

2010-10-22T01:02:00.000-04:00

My story is slowly beginning to take it's shape I believe. Here are some early concepts for discarded avenues.

Wishful

2010-10-21T23:00:00.003-04:00

Batman

2010-10-03T21:41:00.000-04:00

An artist I follow is doing a villain theme challenge this month and that kicked me off on a little Batman fan art :]

Salp

2010-10-02T22:28:00.000-04:00

This little guy used to be my main character, and now he's been cut all together.

Make over time

2010-09-29T02:31:00.005-04:00

Here's some doodles and a new blog layout, yay!

Breaking up is hard to do

2010-09-21T01:49:00.003-04:00

Jenny was originally my thesis film idea, but I've put her on hold in light of what I think is a better story.

We'll meet again Jenny! Fear not.

Inspiraton

2010-09-18T21:38:00.006-04:00

No one does it like Jim.

Of things to come

2010-09-16T23:55:00.002-04:00

The final academic adventure begins.